
13
Known Issues
78-12814-03
Known Issues
CSCds40475 Transfers from a Cisco IP Phone
to a PBX phone via the DPA
7630/7610 are routed directly to
voice mail.
The DPA 7630/7610 functions properly in a
hybrid configuration only if the
Cisco CallManager has a route plan that allows
the Octel Voice Mail System to make calls to a
PBX system via the Cisco CallManager.
For example:
• PBX directory numbers are 5XXX
• Cisco CallManager route plan is 8.XXXXX
In this case, you must create a route plan for the
Cisco CallManager that accepts the PBX pattern
of 5XXX and allows the DPA 7630/7610 to route
the calls over the digital link.
CSCds59539 You cannot manually add a static
route to the DPA 7630/7610.
The DPA 7630/7610 can receive Internet Control
Message Protocol (ICMP) redirects from the
gateway and update its routing tables accordingly.
CSCds73942 When resetting a DPA port from
Cisco Call Manager, the port
status screen on the
DPA 7630/7610 does not always
show the port being reset.
The port status screen is refreshed periodically.
Sometimes, the port completes the reset cycle and
comes back up in between the screen refresh.
CSCds76719 If the event log levels on the
DPA 7630/7610 are set to “trace”
for all ports, then functionality is
impaired.
You should only enable trace if instructed to do so
by a Cisco technical representative.
CSCds91358 On an Octel 250/350, the
DPA 7630/7610 may cause the
“loopback test” from the port test
menu to fail, giving as the reason
“NO AV A RESP.”
This does not indicate an error with the Octel
system. Regular port testing should be disabled on
ports connected to a DPA 7630/7610 to avoid
generating errors on the Octel.
Table 3 DPA 7630/7610 Known Issues (continued)
Bug ID Summary Explanation
Comentarios a estos manuales