Cisco DPA 7610 Manual de usuario descargar pdf (Pagina 14)

Known Issues

78-12814-03

CSCdt04499 Calls going through the

DPA 7630/7610 immediately

after a port has registered with

Cisco CallManager might not be

answered by the Octel system.

This is caused by Octel ports not being

completely ready to accept incoming calls until

some time after they are initialized.

To work around this, do not make calls through

the DPA 7630/7610 until all the ports on the

DPA 7630/7610 have been initialized.

CSCdt12455 The Octel 200 appears to take a

while to initialize its ports when

connected to the DPA 7610.

The ports appear as initialized on the DPA port

status screen, but using the “pstat” command on

the Octel 200, the ports appear to be in “err” state.

Calls made through the DPA 7610 while it is

initializing might be unanswered by the voice

mail system.

To avoid this problem, allow more time for all the

Octel ports to initialize before making calls

through the DPA 7610.

CSCdt15035 The PBX ports on the DPA

7630/7610 appear disabled, but

they are enabled in the Meridian 1

PBX.

The DPA 7630/7610 requires all ports connected

to the Meridian 1 PBX to have key 6 configured as

a MSB key. If they do not have this, the

DPA 7630/7610 cannot determine that the PBX

ports are active. Therefore, the ports appear to be

disabled, and MWIs will not work on PBX

phones.

The DPA 7630/7610 requires the all of the

following keys on ports connected to the PBX:

• 06 MSB (Make Set Busy)

• 13 MIK (Message Indication Key)

• 14 MCK (Message Cancel Key)

CSCdt44142 The DPA 7630/7610 needs to be

restarted after a change to the

Ethernet speed or duplex setting.

This is as designed.

Table 3 DPA 7630/7610 Known Issues (continued)

Bug ID Summary Explanation

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Comentarios a estos manuales

Sin comentarios

Cisco DPA 7610 Manual de usuario Pagina 14

Comentarios a estos manuales

Relacionado con productos y manuales para Gateways / Controladores Cisco DPA 7610