Cisco DPA 7610 Manual de usuario descargar pdf (Pagina 17)

Known Issues

78-12814-03

Known Issues

CSCuk23263 Pauses in Octel’s MWI set/clear

dial string can cause MWIs to fail

on the DPA 7630.

Pauses in the Octel’s message waiting indicator

activation and deactivation dialing sequences can

cause the DPA 7630 to fail to recognize MWI

commands.

This is caused by a timeout in the DPA 7630 while

it waits for all of the digits in the MWI sequence

to be sent. A long delay in the dialing sequence

causes the DPA7630 to assume the command had

been completed before the Octel dials the rest of

the command, and the MWI command would be

missed by the DPA 7630.

In versions prior to 1.2(1), you can resolve this by

removing any pauses from the dialing sequence

specified in the configuration of the Octel.

In version 1.2(1) and later, the DPA 7630 uses any

pauses in the “Definity MWI ON pre-extension

dial string” and “Definity MWI OFF

pre-extension dial string” menu options from the

Configure > Octel/Definity integration menu.

CSCuk23485 Resetting one of the DPA ports

from Cisco CallManager causes

the DPA 7630/7610 to give a

warning that the port has lost its

connection to Cisco CallManager.

This is expected behavior. Resetting a port causes

the DPA 7630/7610 to immediately drop any calls

on that port. The warning indicates a possible

cause of terminated or lost voice mail calls.

Table 3 DPA 7630/7610 Known Issues (continued)

Bug ID Summary Explanation

1 2 ... 12 13 14 15 16 17 18 19 20 21 22

Sin comentarios

Cisco DPA 7610 Manual de usuario Pagina 17