Cisco InfiniBand 4x Guía de usuario Pagina 117
- Pagina / 174
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Chapter 6. Boot from InfiniBand using the Cisco 3012 InfiniBand to FC gateway 103
To configure Fibre Channel SAN, follow these steps:
1. Configure Fibre Channel SAN implies for end-to-end connectivity, the WWPNs of blade,
storage, and Fibre Channel gateway are listed in the Name Server as shown in Figure 6-9.
Figure 6-9 FC Zoning: Active Zoneset view
2. When all the WWPNs are found in the Name Server database as shown in Figure 6-9,
configure the zones using the WWPNs (World Wide Port Names) that consist of the
following members
– Zone A: Fibre Channel Gateway port1 & Storage Controller Port(s)
– Zone B: Fibre Channel Gateway port2 & Storage Controller Port(s)
– Zone C: Blade HCA-port1 & Storage Controller Port(s)
Figure 6-10 lists the zoning implementation for this testing.
Figure 6-10 Active Zoneset View from the MDS9000 switch CLI
Note: For instructions about how to implement FC Zoning, refer to the FC switch User
Guide installed in your environment.
mds9124-A# show fcns database vsan 1
VSAN 1:
----------------------------------------------------------------------------
FCID TYPE PWWN (VENDOR) FC4-TYPE:FEATURE
----------------------------------------------------------------------------
0x2c0000 N 20:25:00:a0:b8:26:12:10 (Symbios) scsi-fcp:target
0x2c0100 N 20:24:00:a0:b8:26:12:10 (Symbios) scsi-fcp:both
0x2c0200 N 20:14:00:a0:b8:26:12:10 (Symbios) scsi-fcp:both
0x2c0300 N 20:15:00:a0:b8:26:12:10 (Symbios) scsi-fcp:target
0x2c0401 N 20:00:00:05:ad:63:5b:b3 scsi-fcp
0x2c0402 N 20:01:00:05:ad:63:5b:b3 scsi-fcp
0x2c0404 N 20:02:00:05:ad:63:5b:b3 scsi-fcp
0x2c0501 N 20:00:00:05:ad:67:5b:b3 scsi-fcp
0x2c0502 N 20:01:00:05:ad:67:5b:b3 scsi-fcp
0x2c0504 N 20:02:00:05:ad:67:5b:b3 scsi-fcp
Total number of entries = 10
Storage
Controller
WWPNs
Blade and FC
gateway
WWPNs
mds9124-A# show zoneset active vsan 1
zoneset name IB-redpaper vsan 1
zone name DS4700-TS3012p2 vsan 1
* fcid 0x2c0501 [pwwn 20:00:00:05:ad:67:5b:b3]
* fcid 0x2c0200 [pwwn 20:14:00:a0:b8:26:12:10]
* fcid 0x2c0300 [pwwn 20:15:00:a0:b8:26:12:10]
* fcid 0x2c0404 [pwwn 20:02:00:05:ad:63:5b:b3]
* fcid 0x2c0502 [pwwn 20:01:00:05:ad:67:5b:b3]
zone name DS4700-TS3012p1 vsan 1
* fcid 0x2c0401 [pwwn 20:00:00:05:ad:63:5b:b3]
* fcid 0x2c0200 [pwwn 20:14:00:a0:b8:26:12:10]
* fcid 0x2c0300 [pwwn 20:15:00:a0:b8:26:12:10]
* fcid 0x2c0402 [pwwn 20:01:00:05:ad:63:5b:b3]
zone name Blade10-vhostp1-DS4700 vsan 1
* fcid 0x2c0404 [pwwn 20:02:00:05:ad:63:5b:b3]
* fcid 0x2c0200 [pwwn 20:14:00:a0:b8:26:12:10]
* fcid 0x2c0300 [pwwn 20:15:00:a0:b8:26:12:10]
FC gateway port 2 -
storage zone
FC gateway port 1 -
storage zone
Blade HCA port 1 -
storage zone
- Redpaper 1
- October 2007 3
- Contract with IBM Corp 4
- Contents 5
- Contents v 7
- Trademarks 10
- Become a published author 13
- Comments welcome 13
- IBM BladeCenter products and 15
- 1.1 BladeCenter chassis 16
- 1.2 Blade servers 19
- 4X InfiniBand networking only 27
- InfiniBand products for 29
- BladeCenter 29
- OK (Green) and Fault (Yellow) 38
- 2.6.2 InfiniBand DDR HCAs 39
- InfiniBand technology 45
- 3.1.1 Upper layer protocols 46
- 3.1.2 Transport layer 46
- 3.1.3 Network layer 47
- 3.1.4 Data link layer 47
- 3.1.5 Physical layer 48
- 12X Link 49
- 3.2.3 Storage RDMA Protocol 50
- 3.3 Hardware 52
- 3.4 Management 52
- 3.5 Common markets 53
- 3.5.1 Application clustering 54
- 3.5.3 Storage area networks 54
- Configuring InfiniBand with 55
- QLogic bridges 55
- 4.1.1 Installing the drivers 56
- 4.1.5 Hints and tips 74
- Figure 4-66 Active SRP Map 89
- Figure 4-67 Add Direct Map 90
- Figure 4-70 93
- 5.2.3 Configuring IPoIB 105
- Cisco 3012 InfiniBand to FC 109
- 6.2 Blade booting from a SAN 110
- Installing hardware 111
- Figure 6-6 Define SRP host 114
- 6.2.5 Configuring storage 118
- 6.2.6 Discovering storage 119
- 6.2.8 Port masking 120
- Loading SCSI driver 128
- Loading ts_srp_host driver 128
- Configuring the Cisco 3012 131
- 7.2 Client information 136
- 7.3.1 The design 137
- EGW = Ethernet Gateway Module 147
- BG1 = Bridge Group 1 147
- Blue = InfiniBand 147
- Green = Ethernet 147
- Int Po5 153
- Figure 7-25 164
- 7.7 Useful CLI commands 169
- 7.7.2 For the 4948 170
- Abbreviations and acronyms 171
- Related publications 173
- Online resources 174
- Help from IBM 174
Relacionado con productos y manuales para Los conmutadores de red Cisco InfiniBand 4x
(18 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.053 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales