Cisco 4900M - Catalyst Switch Manual de usuario descargar pdf (Pagina 21)

_____________________________________________________________________________________

Deployment of Dell M6348 Blade Switch with Cisco 4900M Catalyst Switch Page 19

• Click Apply

Configuring the Cisco 4900M Switch

configure port channels and add them to the ports. In this example we are adding

ports 1-2 to port-channel 1 and ports 3-4 to port-channel 2.

Figure 23: Command-Line Interface for Cisco 4900M Catalyst switch for Scenario 4.

Scenario 5: Adding VLANs in a multi-AG configuration

In this section, we provide an overview of adding VLANs in a multi-AG configuration, which

combine the advantages of virtual network administration with physical network separation.

The Tengigabitethernet ports 1/0/3 and 1/0/4 used in this example on the M6348 are CX4s and

will require your Catalyst 4900M to have X2-CX4-10G modules installed in order to connect the

second LAG.

Ports Tengigabitethernet 1/0/3 and 1/0/4 on the M6348 are in stacking mode by default. You

will need toggle them to ethernet mode to establish links to the Catalyst 4900M.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 34 35

Sin comentarios

Cisco 4900M - Catalyst Switch Manual de usuario Pagina 21