Cisco 4900M - Catalyst Switch Manual de usuario descargar pdf (Pagina 30)

_____________________________________________________________________________________

Deployment of Dell M6348 Blade Switch with Cisco 4900M Catalyst Switch Page 28

Configuring the Dell M6348 Switch

Command-Line Interface:

If you are using the M6348 CLI, enter the following commands to remove all external

1Gig ports from port-aggregator group 1. Then add two external 10Gig ports to

group 1 as the primary LAG and another two external 10Gig ports to group 1 as the

secondary LAG. Figure 36 shows the command-line interface for configuring Dell

M6348 switch using firmware version 4.1.

Figure 36: Command-Line Interface for Dell M6348 Switch for Scenario 6.

Web Interface:

Follow the steps below:

• Select Switching > Port Aggregator > Port Configuration

• In the Port Configuration screen, make ports Te1/0/1-4 members of Group Id 1.

• Remove the 1 from the Group Id fields for ports Gi1/0/33-48.

• Verify the Lag Role fields for Te1/0/1 and Te1/0/2 are set to Primary.

• Change the Lag Role of ports Te1/0/3 and Te1/0/4 to 2 Secondary (Figure 37).

1 2 ... 25 26 27 28 29 30 31 32 33 34 35

Sin comentarios

Cisco 4900M - Catalyst Switch Manual de usuario Pagina 30