Cisco Catalyst 1800 Guide Manual de usuario descargar pdf (Pagina 11)

Getting Started 2-11

Quick Configuration

The System Information menu appears.

Figure2-9 System Information Menu

Step4 Continue entering the following:

Description<SP>

Step5 Enter a description for the Cisco Catalyst 1800 and press <CR>.

If you want spaces between words, enclose the words between double quotes. For

example, type “Cisco Catalyst 1800”.

Step6 Press <Ctrl-P>. The previous command is recalled.

Step7 Press <Backspace> until the value and the Description keyword are removed.

Step8 Type the following command:

Name<SP>

Step9 Enter a unique name for the Cisco Catalyst 1800 and press <CR>. For example, type

TRswitch.company.com.

Note You do not need to enclose this designation with quotes, unless there are spaces

within the name.

Step10 Press <Ctrl-P>. The previous command is recalled.

Step11 Press <Backspace> until the value and the Name keyword are removed.

Step12 Type the following command:

Location<SP>

Step13 Enter the location of the Cisco Catalyst 1800 and press <CR>.

For example, type “Bldg. 9 Anytown”.

Step14 Press <Ctrl-P>. The previous command is recalled.

Cisco Systems Catalyst 1800 Token Ring Switch

System Information

Description : Cisco Catalyst 1800

Admin. Contact : Technical Support

Name : TRSwitch.company.com

Location :

Date : Thursday, September 21, 1995 DST

Time : 11:50:21

UpTime : 10 days 6:44:45

Temperature : 51°C

Power Config : A

HW Rev : K00 S/N: 25510121 Part #: MOD-0044-00

SW Rev : TRX.2.1.6

HW Image Rev : TRX A34

Boot ROM Rev : TRX MP01.x1-TRX LB0.2x1

Catalyst 1800> configure system display

Cisco Catalyst 1800 Guide Manual de usuario Pagina 11