Cisco IAD2431-1T1E1 Guía de instalación descargar pdf (Pagina 12)

• Attach both brackets to the wall.

Note For attaching to a wall stud, each bracket requires two #10 wood screws (round- or pan-head) with #10 washers,

or two #10 washer-head screws. The screws must be long enough to penetrate at least 3/4 inch (20 mm) into

supporting wood or metal wall stud.

Note For hollow-wall mounting, each bracket requires two wall anchors with washers. Wall anchors and washers must

be size #10.

• Figure 9 shows the orientation required for installation.

Figure 9 Attaching the Chassis to a Wall

103514

CISCO IAD2400

SERIES

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Sin comentarios

Cisco IAD2431-1T1E1 Guía de instalación Pagina 12