Cisco IAD2431-1T1E1 Guía de instalación descargar pdf (Pagina 14)

Step 4 Attach the ground lug or ring terminal to the chassis as shown in Figure 10 or Figure 11. For the ground lug, use the

two screws with captive locking washers provided. For a ring terminal, use one of the screws provided. Use a number 2

Phillips screwdriver, and tighten the screws to a torque of 8 to 10 in-lb (0.9 to 1.1 N-m).

Step 5 Connect the other end of the ground wire to a grounding point at your site.

Figure 10 NEBS-Compliant Chassis Ground Connection Using Ground Lug

Figure 11 Chassis Ground Connection Using Ring Terminal

6 Installing a WAN or Voice Interface Card

The Cisco IAD2430 series IAD includes a slot for a WAN interface card (WIC) or voice interface card (VIC). The following

WICs and VICs (also used by Cisco 2600 series and Cisco 3600 series routers) are supported in releases of the Cisco IAD2430

series:

• WIC-1T

• WIC-2T

• WIC-1DSU-T1

• VIC2-2FXS

• VIC2-4FXS

• VIC2-2FXO

• VIC2-4FXO

• VIC2-2BRI-NT/TE

• WIC-1ADSL

• WIC-1SHDSL-V2

• WIC-1ADSL-DG

• VWIC-2MFT-T1

• VWIC-2MFT-E1

88844

Ground lug

103512

Ring terminal

attachment

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Sin comentarios

Cisco IAD2431-1T1E1 Guía de instalación Pagina 14