Cisco ISE - Line Card ISE Manual de usuario descargar pdf (Pagina 46)

Cisco IOS SoftwareConfiguration for theCisco 12000 SeriesOne-Port Channelized OC-12/STM-4(DS1/E1) ISE Line

Verifying and Monitoring Configurations with Show Commands

Cisco IOS Release 12.0(27)S1

Discovering the Version of the Current Software and Hardware—show version

The show version command displays the configuration of the system hardware (the channel of each line

card installed), the software release currently operating, the names and sources of configuration files,

and the boot images. The following example lists the 1-Port CHOC-12 ISE line card interface as an

active line card.

Router# show version

Cisco Internetwork Operating System Software

IOS (tm) GS Software (GSR-P-M), Version 12.0(27)S1, SOFTWARE

TAC Support: http://www.cisco.com/tac

Compiled Tue 14-Feb-04 16:58 by nmasa

Image text-base: 0x50010C60, data-base: 0x5314A000

ROM: System Bootstrap, Version 11.2(20030116:225008) [rarcher-pre_lci_throttle 184],

DEVELOPMENT SOFTWARE

BOOTLDR: GS Software (GSR-BOOT-M), Version 12.0(8)S, EARLY DEPLOYMENT RELEASE SOFTWARE

(fc1)

lab1 uptime is 1 week, 3 days, 23 minutes

System returned to ROM by reload

System image file is "tftp://225.255.255.254//tftpboot/gsr-p-mz.120-26.3.S"

cisco 12008/GRP (R5000) processor (revision 0x05) with 262144K bytes of memory.

R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache

Last reset from power-on

1 Route Processor Card

2 Clock Scheduler Cards

3 Switch Fabric Cards

1 One-port Channelized OC-12 controller (1 OC12s)

1 card shutdown

1 Ethernet/IEEE 802.3 interface(s)

10 Serial network interface(s)

507K bytes of non-volatile configuration memory.

20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).

8192K bytes of Flash internal SIMM (Sector size 256K).

Configuration register is 0x0

Router#

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 57 58

Sin comentarios

Cisco ISE - Line Card ISE Manual de usuario Pagina 46