Cisco ISE - Line Card ISE Manual de usuario descargar pdf (Pagina 8)

Cisco IOS SoftwareConfiguration for theCisco 12000 SeriesOne-Port Channelized OC-12/STM-4(DS1/E1) ISE Line

How to Configure Layer 1 Features

Cisco IOS Release 12.0(27)S1

Detailed Steps:

Shutdown—shut down channelized

SONET controller

[no] shutdown shutdown

Thresholds—set BER threshold values [no] threshold [b1-tca | b2-tca | b3-tca

| sd-ber] [3..9]

b1-tca=6 (10e

-6

)

b2-tca=6 (10e

-6

)

b3-tca=6 (10e

-6

)

sd-ber=6 (10e

-6

)

sf-ber=3 (10e

-3

)

Command or Action Purpose

Step 1

enable

Example:

Router> enable

Enables privileged EXEC mode.

• Enter your password if prompted.

Step 2

configure terminal

Example:

Router# configure terminal

Enters global configuration mode.

Step 1

controller sonet

slot

port

Example:

Router(config)# controller sonet 1/0

Selects the physical port to configure, and enters controller

configuration mode. The 1-Port CHOC-12 ISE line card

only has port 0.

To shut down the SONET controller, use the shutdown

controller command. When shut down, the OC-12/STM-4

port transmits a Line AIS (MS-AIS) signal. The received

signal is ignored.

Bring the SONET controller back up with the no shutdown

controller command.

Step 2

framing {sonet | sdh}

Example:

Router(config-controller)# framing sdh

Specifies SONET or SDH framing type. The default is

SONET framing.

Table 1 Controller Parameters and Default Conﬁguration Values (continued) (continued)

Parameter Configuration Command Default Value

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 57 58

Comentarios a estos manuales

Sin comentarios

Cisco ISE - Line Card ISE Manual de usuario Pagina 8

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco ISE - Line Card ISE