Cisco MC16S Manual de usuario descargar pdf (Pagina 30)

Command Reference

12.0(7)XR2

Command History

Example

The following example conﬁgures a power level of 2 dBmV to upstream cable interface 0:

Router(config-if)# cable upstream 0 power-level 2

The following example sets the upstream power level for cable interface 0 to the default setting of

0 dBmV:

Router(config-if)# no cable upstream 0 power-level

Note The upstream 0 command can be abbreviated as u0.

Related Commands

Release Modiﬁcation

11.3 NA This command was introduced.

Command Description

cable modulation-proﬁle Speciﬁes the center frequency for a given upstream cable interface.

cable upstream hopping blind Speciﬁes the channel width of the given upstream cable interface.

cable upstream hopping blind Conﬁgures preset modulation proﬁles that you can apply to one or more

upstream cable interfaces when you identify and conﬁgure spectrum groups.

cable upstream shutdown Activates or shuts down a speciﬁed upstream cable interface.

Debug Commands Conﬁgures spectrum management characteristics for the given spectrum

group.

Debug Commands Disengages the advanced spectrum management features of the MC16S cable

modem card by enabling blind frequency hopping behavior.

1 2 ... 25 26 27 28 29 30 31 32 33 34

Sin comentarios

Cisco MC16S Manual de usuario Pagina 30