Cisco ASR 1001 Guía de instalación descargar pdf (Pagina 12)

11-328

Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide

OL-13208-11

Chapter 11 Cisco ASR 1001 Router Overview and Installation

Cisco ASR 1001 Router Description

The main components of the Cisco ASR 1001 Router, ASR1000-RP1, ASR1000-ESP5, and

ASR1000-SIP10 are fixed in the chassis and are not upgradeable, except for the power supplies and

SPAs.

Cisco Embedded ASR1000-RP1 for Cisco ASR 1001 Router Description

The Cisco ASR 1000 Series route processor (embedded for the Cisco ASR 1001 Router) is the central

control processor and runs the network operating system.

The Cisco embedded ASR1000-RP1 supports management interfaces such as the Ethernet network

management port and console and auxiliary serial ports. It has LED status indicators and one USB port

that can be used with smart cards for either secure key distribution or image or configuration file updates.

The Cisco embedded ASR1000-RP1 deviates from the other ASR Series Route Processor 1 for the Cisco

ASR 1006 router and the Cisco ASR 1004 Router in the following ways:

• Bulk file storage is on a large eUSB device (to 8 GB supported) with no SATA hard-drive supported.

• Redundant Cisco route processor is not supported.

• Network clock changes. No second BITS clock input supported.

• A built-in 4xGE SPA is included. This shared port adapter provides four SFP-based GE connections.

The Cisco route processor common LEDs and indicators are shown in Figure 11-6. Table 11-1 describes

the Cisco ASR 1000 Series Route Processor LEDs.

Table 11-1 Cisco ASR 1001 Series Route Processor LEDs

LED Label LED Color—State Behavior Description

PWR Power Solid green All power requirements are within specification

Off Off. The router is in standby mode.

STAT System status Solid green Cisco IOSD and other required processes have loaded

successfully and are operating.

Yellow ROMMON is running (including a permanent failure of RP

software) or the Process Manager has declared a critical RP

process (including IOSD) dead. A user can log in to recover.

Red Occurs during system failure or power-up.

CRIT Critical Solid Red Functions as a critical alarm indicator. The LED is lso a solid

red during the boot process.

MAJ Major Solid Red Major alarm indicator.

MIN Minor Amber Minor alarm indicator.

BOOT Internal eUSB

bootflash LED

Green Activity indicator.

LINK 10/100/1000

Interface LED

Solid green Link with no activity.

Flashing Green MGMT Ethernet port activity.

Off No link.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Comentarios a estos manuales

Sin comentarios

Cisco ASR 1001 Guía de instalación Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Routers Cisco ASR 1001