Cisco ASR 1001 Guía de instalación descargar pdf (Pagina 28)

11-344

Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide

OL-13208-11

Chapter 11 Cisco ASR 1001 Router Overview and Installation

Attaching a Chassis Ground Connection

Recommended Tools and Supplies

The following tools, equipment, and supplies necessary to connect the system ground to the chassis:

• Phillips screwdriver

• 3.5 mm flat blade screwdriver (Phoenix # 1205053 or equivalent 3.5 mm flat blade)

• Dual-lug chassis ground component

• Grounding wire

Figure 11-19 shows how to attach the ground lugs on the Cisco ASR 1000 Series chassis. The location

of the ground lug on Cisco ASR 1000 Series Routers may not be the same on all routers; but the ground

lug attachment instructions are similar.

Figure 11-19 Installing a Ground Connection on the Cisco ASR 1001 Router

Warning

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the

absence of a suitably installed ground conductor. Contact the appropriate electrical inspection

authority or an electrician if you are uncertain that suitable grounding is available.

Statement 1024

Before you connect power or turn on power to your chassis, you must provide an adequate chassis ground

(earth) connection for the chassis. A chassis ground connector is provided on each Cisco ASR 1001

Router. There is a stud on the side of the chassis and on the DC power supply (primary grounding stud).

207763

1 Chassis ground studs and lead wire 3 Ground connector on the chassis

2 Grounding screws 4 Ground symbol

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 43 44

Sin comentarios

Cisco ASR 1001 Guía de instalación Pagina 28