Cisco 7246 - uBR Router Manual de usuario descargar pdf (Pagina 44)

Command Reference

12.0(3)T

clear cable modem reset

To remove a modem from the Station Maintenance List and reset the modem, use the clear cable

modem reset privileged EXEC conﬁguration command.

clear cable modem {mac-addr | ip-addr | all} reset

Syntax Description

Default

No default behavior or values.

Command Mode

Privileged EXEC

Command History

Usage Guidelines

This command causes the link to the modem to drop. The modem responds by resetting itself. It can

take up to 30 seconds for the modem to start the reset sequence.

Example

The following example removes the cable modem at 172.00.00.00 from the Station Maintenance

List:

Router# clear cable modem 172.00.00.00 reset

Related Commands

mac-addr MAC address. Specify the 48-bit hardware address of an

individual cable modem.

ip-addr IP address. Specify the IP address of an individual cable modem.

all Removes all the cable modems from the Station Maintenance

List.

Release Modiﬁcation

11.3 NA This command was ﬁrst introduced.

Command Description

clear cable modem counters Clears the ﬂapping counters for the speciﬁed modem.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 77 78

Sin comentarios

Cisco 7246 - uBR Router Manual de usuario Pagina 44