Cisco 7246 - uBR Router Manual de usuario descargar pdf (Pagina 57)

show controllers cable

Cisco uBR7246 Universal Broadband Router Feature Enhancements 57

show controllers cable

To display information about a speciﬁc cable modem card slot’s interface controllers, use the show

controllers cable privileged EXEC command.

show controllers cable slot/port [upstream] [port]

Syntax Description

Default

No default behavior or values.

Command Mode

Privileged EXEC

Command History

Sample Display

The following is sample output from the show controllers cable upstream command for the

modem located in slot 4, port 0:

Router# show controllers cable 4/0 upstream 2

Cable4/0 Upstream 2 is administratively down

Frequency 5.008 MHz, Channel Width 0.200 MHz, QPSK Symbol Rate 0.160 Msps

Spectrum Group 4

Nominal Input Power Level 5 dBmV, Tx Timing Offset 0

Ranging Backoff Start 16, Ranging Backoff End 16, Tx Backoff Start 16

Tx Backoff End 16, Modulation Profile Group 1

part_id=0x3137, rev_id=0x01, rev2_id=0xFF

nb_agc_thr=0x0000, nb_agc_nom=0x0000

Range Load Reg Size=0x58

Request Load Reg Size=0x0E

Minislot Size in number of Timebase Ticks is = 8

Minislot Size in Symbols =8

Bandwidth Requests = 0x0

Piggyback Requests = 0x0

Invalid BW Requests= 0x0

Minislots Requested= 0x0

Minislots Granted = 0x0

Minislot Size in Bytes = 2

UCD Count = 0

slot/port Slot number/port number indicating the location of the

Cisco MC11 cable modem card.

upstream (Optional) Displays upstream interface status.

port (Optional) Selects speciﬁc upstream port.

Release Modiﬁcation

11.3 XA This command was ﬁrst introduced.

12.0(2)XC This command was modiﬁed.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 77 78

Sin comentarios

Cisco 7246 - uBR Router Manual de usuario Pagina 57