Cisco 7246 - uBR Router Manual de usuario descargar pdf (Pagina 48)

Command Reference

12.0(3)T

show cable modem

To view conﬁguration settings on the Cisco uBR7246, use the show cable EXEC command.

show cable modem [ip-address | mac-address]

Syntax Description

Default

No default behavior or values.

Command Mode

Privileged EXEC

Command History

Usage Guidelines

This command displays information on all cable modems or a particular cable modem on the

network.

Sample Display

The following are sample outputs from the show cable modem command:

router# show cable modem

Interface SID Online Timing Receive QoS IP address MAC address

State Offset Power

Cable6/0/U0 1 online 3046 -2.00 4 10.30.128.35 0010.7b6b.7213

Cable6/0/U0 2 online 3047 0.00 4 10.30.128.34 0010.7bb3.fbdd

Cable6/0/U0 3 offline 3033 6.75 2 0.0.0.0 0020.4001.3e66

Table 2 describes the ﬁelds shown in the show cable modem display.

ip-address (Optional) Specify the IP address of the modem.

mac-address (Optional) Specify the MAC address of the modem.

Release Modiﬁcation

11.3 XA This command was ﬁrst introduced.

Table 2 show cable modem Field Descriptions

Field Description

Interface The interface on which the cable modem has an active connection and the

upstream port on the interface that is being used by the cable modem.

SID The service identiﬁer assigned to the modem.

Online State The status of the cable modem.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 77 78

Sin comentarios

Cisco 7246 - uBR Router Manual de usuario Pagina 48