Cisco 7301 Información técnica descargar pdf (Pagina 20)

Observe the System Startup and Perform a Basic Configuration

Check conditions prior to system startup:

Step 1 Check that all hardware parts and cables are securely attached to the chassis.

Step 2 Check that port adapter configuration information is available, if needed.

Step 3 Check that a CompactFlash Disk is installed.

Step 4 Check that the console terminal is turned on.

Start the Router

Step 1 Place the power switch in the ON (|) position.

Step 2 Listen for the fans; they should be operating as soon as power is turned on. The following table provides information

about the LEDs as the system starts.

Figure 18 Identifying LEDs and LED Status

Step 3 During the boot process, observe the system LEDs. The STATUS LED comes on immediately as amber, then turns to

green when the Cisco IOS is booted. Port adapter LEDs go on and off irregularly.

Step 4 Observe the initialization process. The port adapter ENABLED LEDs go on when initialization is completed and the

console screen displays a script and system banner.

No. LED Label LED Color Status

LED flashes when

there is traffic

1 LINK (0/0) LINK (0/0) Green — Yes

2 RJ-45 EN (0/0) RJ-45 enable (0/0) Green In the Power Up state,

the LED is On

No, remains

constantly on

3 LINK (0/1) LINK (0/1) Green — Yes

4 RJ-45 EN (0/1) RJ-45 enable (0/1) Green In the Power Up state,

the LED is On

No, remains

constantly on

5 LINK (0/2) LINK(0/2) Green — Yes

6 RJ-45 EN (0/2) RJ-45 enable (0/2) Green In the Power Up state,

the LED is On

No, remains

constantly on

7 STATUS System status Amber while the system boots

Green when the system is

operational

—

In the Power Up state,

the LED is On

No, remains

constantly on

80266

ALARM

RJ45 EN

LINK

TX RX

GBIC

GIGABIT ETHERNET 0/2

RJ45 EN

LINK

TX RX

GBIC

GIGABIT ETHERNET 0/0

RJ45 EN

LINK

TX RX

GBIC

GIGABIT ETHERNET 0/1

CISCO 7301

CONSOLEAUX

COMPACT

FLASH

STATUS

100-240V, 2A, 50/60 Hz

24V

9A, 48 - 60V

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

Comentarios a estos manuales

Sin comentarios

Cisco 7301 Información técnica Pagina 20

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco 7301