Cisco 827 - 827 Router - EN Manual de usuario descargar pdf (Pagina 18)

Network Scenarios Pagina 18 di 35

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/827/827swcfg/ntwkscen.htm 14/02/2001

Configuration Example

In the following configuration example, you do not have to enter the commands marked "default." These

commands appear automatically in the configuration file generated when you use the show running-

config command.

bridge irb

interface Ethernet0

ip address 192.168.1.1 255.255.255.0

no ip directed-broadcast (default)

ip nat inside

interface ATM0

no ip address

no ip directed-broadcast (default)

ip nat outside

no atm ilmi-keepalive (default)

pvc 8/35

encapsulation aal5snap

bridge-group 1

interface BVI1

ip address 200.200.100.1 255.255.255.0

no ip directed-broadcast (default)

ip nat outside

ip nat pool test 200.200.100.1 200.200.100.1 netmask 255.255.255.0

ip nat inside source list 101 pool test overload

ip classless (default)

bridge 1 protocol ieee

bridge 1 route ip

access-list 101 permit ip 192.168.1.0 0.0.0.255 any log

ip route 0.0.0.0 0.0.0.0 200.200.100.254 (default gateway)

12 .

Enter configuration mode for the

BVI.

Router

(config)#

interface bvi 1

13 .

Establish the BVI as the outside

interface.

Router

(config-if)

ip nat outside

14 .

Enable interface and configuration

changes just made to the interface.

Router

(config-if)

no shutdown

15 .

Exit configuration mode for the BVI. Router

(config-if)

end

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 34 35

Comentarios a estos manuales

Sin comentarios

Cisco 827 - 827 Router - EN Manual de usuario Pagina 18

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco 827 - 827 Router - EN