Cisco 827 - 827 Router - EN Manual de usuario descargar pdf (Pagina 27)

Network Scenarios Pagina 27 di 35

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/827/827swcfg/ntwkscen.htm 14/02/2001

¡ Configuring VoIP dial peers for H.323 signaling

l Configuration Examples

Use the following tables to configure this scenario. Each command includes the values in the data and

voice configuration examples shown at the end of this section. Configuration examples are shown for the

827-4V router and the gateway and gatekeeper endpoint routers.

After configuring your router, you need to configure the PVC endpoint. For a general configuration

example, refer to "Cisco 3640 Gateway Configuration Example" at the end of this chapter.

Configuring the Class Map, Route Map, and Policy Map

Follow the steps below to configure the class map, route map, and policy map, beginning in global

configuration mode.

Step Task Router

Prompt

Command

1 .

Configure the access list. Router

(config)#

access-lists 101 permit ip

any any precedence 5

2 .

Configure the class map. Router

(config)#

class-map voice

3 .

Assign access list 101 to the

class map.

Router

(config-if)#

match access-group 101

4 .

Configure the route map. Router

(config)#

route-map data permit 10

5 .

Set the IP precedence. Router

(config)#

ip precedence routine

6 .

Configure a policy map. Router

(config)#

policy-map mypolicy

7 .

Specify the class for queuing

voice traffic.

Router

(config)#

class voice

8 .

Specify the bandwidth for

queuing.

Router

(config)#

priority 176

9 .

Configure the default class for all

traffic but voice traffic.

Router

(config)#

class class-default

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34 35

Comentarios a estos manuales

Sin comentarios

Cisco 827 - 827 Router - EN Manual de usuario Pagina 27

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco 827 - 827 Router - EN