Cisco 827 - 827 Router - EN Manual de usuario descargar pdf (Pagina 28)

Network Scenarios Pagina 28 di 35

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/827/827swcfg/ntwkscen.htm 14/02/2001

Configuring the Ethernet Interface

Follow the steps below to configure the Ethernet interface, beginning in global configuration mode.

Configuring the ATM Interface

Follow the steps below to configure the ATM interface, beginning in global configuration mode.

Total bandwidth for the policy map may not exceed 75 percent of the total PVC bandwidth.

Step Task Router

Prompt

Command

1 .

Enter configuration mode for the

Ethernet interface.

Router

(config)#

interface ethernet 0

2 .

Set the IP address and subnet mask

for the Ethernet interface.

Router

(config-if)#

ip address 20.20.20.20

255.255.255.0

3 .

Configure the IP policy route map. Router

(config-if)#

ip policy route-map data

4 .

Enable fast-switching policy routing. Router

(config-if)#

ip route-cache policy

5 .

Enable the Ethernet interface. Router

(config-if)#

no shutdown

6 .

Exit configuration mode for the

Ethernet interface.

Router

(config-if)#

exit

Step Task Router

Prompt

Command

1 .

Enter configuration mode for the ATM

interface.

Router

(config)#

interface ATM 0

2 .

Set the IP address and subnet mask

for the ATM interface.

Router

(config-if)#

ip address 10.10.10.20

255.255.255.0

3 .

Create an ATM PVC for each end

node with which the router

communicates.

Router

(config-if)#

pvc 8/35

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35

Comentarios a estos manuales

Sin comentarios

Cisco 827 - 827 Router - EN Manual de usuario Pagina 28

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco 827 - 827 Router - EN