Cisco Explorer 8300 Guía de usuario descargar pdf (Pagina 5)

BEFORE INSTALLING THE EXPLORER

SERIE 8000 OR 8300, PVR OR PVR HD…

• Read the Important Rules for Safe Operation on the previous page.

• Locate the serial number, which is on a bar code on the back panel of the unit. Write it down here:

_________________________ You may need this number if your system requires troubleshooting in the future.

• If the unit is plugged into an outlet that is controlled by a wall switch, make sure the switch is always in the ON

position to enable nightly updates to the Program Guide.

• It is recommended that you use a surge protector with the unit.

IMPORTANT – For high-definition EXPLORER

PVR terminals (8000 HD, 8300 HD):

1. Turn off your PVR.

2. Press and hold both the GUIDE and INFO buttons on the terminal’s front panel.

3. Look at the terminal’s display: it indicates "HD" then changes to "SD" after about 10 seconds, then changes back to

"HD", and so on.

4. If you will be using your PVR HD with a high-definition TV, press the EXIT button when "HD" is displayed, and go on to

the next section of this guide.

5. If you will be using your PVR HD with a standard TV for now, press the EXIT button when "SD" is displayed.

This configures the terminal so that it works exactly like a standard PVR. You can then refer to the instructions for the

standard version of your terminal. The key point to keep in mind involves the output connections: the "Y" output of

the terminal becomes your "video out", and the Pr and Pb outputs are disabled.

BSIC INSTLLTION

EXPLORER

8000 PVR HDEXPLORER

8300 PVR HD

Press the GUIDE and INFO

buttons at the same time

Press the GUIDE and INFO

buttons at the same time

1 2 3 4 5 6 7 8 9 10 ... 70 71

Sin comentarios

Cisco Explorer 8300 Guía de usuario Pagina 5