
1-14
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 1 Product Overview
Hardware Features
• 3G Cellular Data WAN Connectivity
• Wireless LAN Connectivity
• Feature Summary
Kensington Lock
A Kensington security slot is located on the router back panel. To secure the router to a desktop or other
surface, use the Kensington lockdown equipment.
Reset Button
The Reset button resets the router configuration to the default configuration set by the factory. To restore
the router configuration to the default configuration set by the factory, simultaneously press the reset
button while applying power to the router.
Note When the CLI reboot command is issued while the embedded wireless AP is running Cisco Unified IOS
software, the router reboots and the AP continues running. Clients with Cisco
Unified IOS software are
controlled by a wireless LAN controller (WLC) and can be reset only by the controller.
LEDs
The LEDs are located on the front panel of the router. Table 1-1 describes the LEDs for the Cisco 860
series, 880 series, and 890 series ISRs.
Ta b l e 1-1 LED Descriptions for the Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series ISRs
LED Color Description 860 Series 880 Series 890 Series
Power OK Green On—DC power is being supplied to the router and the
Cisco
IOS software is running.
Blinking—Bootup is in process, or the router is in
ROMMON monitor mode.
Off—Power is not supplied to the router.
All models All models All models
Link Status FE0
1
Green On—Ethernet port is connected.
Blinking—Data is either being received or being
transmitted.
Off—Ethernet port is not connected.
All models All models All models
Link Status FE1
Link Status FE2
Link Status FE3
Link Status FE4 Green On—Ethernet port is connected.
Blinking—Data is either being received or being
transmitted.
Off—Ethernet port is not connected.
— — All models
Link Status FE5
Link Status FE6
Link Status FE7
Comentarios a estos manuales