Cisco Multiband Diversity Omnidirectional Ceiling-Mount Antenna AIR-ANTM4050V-R Guía de instalación descargar pdf (Pagina 45)

2-9

Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide

OL-16193-03

Chapter 2 Installing the Router

Installing the Router

Installing in a Rack

The Cisco 890 series ISRs can be mounted in a rack. To install a Cisco 890 series ISR in a rack, follow

these steps:

Step 1 Remove the screws shown in Figure 2-6.

Figure 2-6 Screw Location

Step 2 Using the screws provided, attach the rack-mount brackets to the Cisco 890 series ISR chassis as shown

Figure 2-7. Use two screws on each side. Use a number 2 Phillips screwdriver to install the bracket

screws on both sides of the chassis.

Caution Do not overtorque the screws. The recommended torque is 6 to 8 in-lb (0.7 to 0.9 N-m).

Figure 2-7 Attaching the Rack-mount Brackets to the Cisco 890 Series ISR

1 Screws

278159

272484

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 89 90

Sin comentarios

Cisco Multiband Diversity Omnidirectional Ceiling-Mount Antenna AIR-ANTM4050V-R Guía de instalación Pagina 45