Cisco Multiband Diversity Omnidirectional Ceiling-Mount Antenna AIR-ANTM4050V-R Guía de instalación descargar pdf (Pagina 57)

3-9

Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide

OL-16193-03

Chapter 3 Connecting the Router

Connecting the 3G Card

Step 4 Make sure that your modem and the router auxiliary port are configured for the same transmission speed

(up to 115200 bits per second [b/s] is supported) and support mode control with data carrier detect

(DCD) and data terminal ready (DTR).

Connecting the 3G Card

Note The Cisco 880G router does not support OIR of the 3G card. You must enter the shutdown command on

the cellular interface before you remove the 3G card from the router.

To connect and secure the 3G card, follow these steps:

Step 1 Align the 3G card to the 3G express card slot, as shown in Figure 3-7. Keep the card parallel to the

surface and firmly push the card into the slot.

Tip Holding the 3G card on the flat metal surface will make it easier to align and insert the 3G card.

Note When inserting the card into the 3G express card slot, you may hear a metal-on-metal sound as

the 3G card rubs against the internal metal cage. The 3G card is designed to fit tightly into the

3G express card slot. Firm pressure may be required to insert the card.

Note Global System for Mobile Communications (GSM) customers need to insert a SIMM card,

provided by their network carrier, into the 3G card.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 89 90

Sin comentarios

Cisco Multiband Diversity Omnidirectional Ceiling-Mount Antenna AIR-ANTM4050V-R Guía de instalación Pagina 57