Cisco Multiband Diversity Omnidirectional Ceiling-Mount Antenna AIR-ANTM4050V-R Guía de instalación descargar pdf (Pagina 65)

3-17

Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide

OL-16193-03

Chapter 3 Connecting the Router

Connecting an xDSL Line

Warning

Hazardous network voltages are present in WAN ports regardless of whether power to the unit is OFF

or ON. To avoid electric shock, use caution when working near WAN ports. When detaching cables,

detach the end away from the unit first.

Statement 1026

To connect the router to a global industry standard symmetrical high-speed DSL (G.SHDSL) line,

very-high-speed digital subscriber line 2 (VDSL2) port, or an ADSL2+ line, follow these steps:

Step 1 Connect one end of an RJ-11 (RJ-45 on 880 E models) cable to the port on the router. See Figure 3-16.

Figure 3-16 Connecting the xDSL Line

Step 2 Connect the other end of the cable to the DSL wall jack.

Caution The primary WAN port is designed for an RJ-45 connector only. Damage to the primary WAN port may

occur if a non RJ-45 connector is inserted

Note The DSL line must be provisioned by your service provider and correctly configured so that the LED

shows the carrier detect (CD) status.

1 G.SHDSL port, VDSL2oPOTS port, or

ADSL2+ port

2 DSL wall jack

232175

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 89 90

Sin comentarios

Cisco Multiband Diversity Omnidirectional Ceiling-Mount Antenna AIR-ANTM4050V-R Guía de instalación Pagina 65