Cisco Multiband Diversity Omnidirectional Ceiling-Mount Antenna AIR-ANTM4050V-R Guía de instalación descargar pdf (Pagina 75)

3-27

Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide

OL-16193-03

Chapter 3 Connecting the Router

Verifying Connections

To wireless LAN WLAN LINK Wireless LAN link status:

• Green if at least one client is associated.

• Off if no client is associated.

WLAN 2.4 GHz Wireless LAN 2.4-GHz status:

• Green when radio is connected, SSID

is configured,

signal is being transmitted, and client is associated.

• Slow blinking when radio is connected, SSID is

configured, and signal is being transmitted.

WLAN 5.0 GHz Wireless LAN 5.0-GHz status:

• Green when radio is connected, SSID is configured,

signal is being transmitted, and client is associated.

• Slow blinking when radio is connected, SSID is

configured, and signal is being transmitted.

PoE

PoE 0 Green when connected and powered.

PoE 1 Amber when there is a fault with the inline power supply.

1. FE = Fast Ethernet.

2. xDSL = General term referring to various forms of DSL, including ADSL (asymmetric digital subscriber line), VDSL (very-high-data-rate digital

subscriber line), and G.SHDSL.

3. DSLAM = digital subscriber line access multiplexer.

4. 3G = Third-Generation.

5. WWAN = wireless WAN.

6. RSSI = Received Signal Strength Indicator.

7. CDMA = code division multiple access.

8. GSM = Global System for Mobile Communications.

9. PPP = Point-to-Point Protocol.

10. PPPoE = PPP over Ethernet.

11. PPPoA = PPP over ATM.

12. VPN = Virtual Private Network.

13. SSID = service set identifier.

14. PoE = Power over Ethernet.

Table 3-1 Verifying the Router Operation (continued)

Power and Link LEDs to Check Normal Patterns

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 89 90

Sin comentarios

Cisco Multiband Diversity Omnidirectional Ceiling-Mount Antenna AIR-ANTM4050V-R Guía de instalación Pagina 75