Cisco Cisco Aironet Wireless LAN Client Especificaciones descargar pdf (Pagina 61)

4-7

Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Linux

OL-1376-02

Chapter 4 Enabling Security Features

Using the Client Encryption Manager

Note If you enable MIC on the access point, your client driver must be version 2.0 or greater and client

firmware must be version 4.25.2x or greater to support these features; otherwise, the client cannot

associate.

Enabling LEAP

Follow these steps to enable LEAP for your client adapter.

Step 1 From the ACU’s Command drop-down menu, click Edit Properties.

Step 2 Open the Network Security screen.

Step 3 Click the LEAP button.

Step 4 Click OK to save the setting to return to the ACU main screen.

Step 5 Click the Commands tab. The Commands drop-down menu appears. Note that the Set Leap Information

option is now accessible.

Step 6 Click the Set Leap Information option. The Set Leap Password screen appears (Figure 4-5).

Figure 4-5 Set Leap Password Screen

Note Usernames and passwords are case sensitive and can contain up to 32 characters.

Step 7 Enter your username in the Username field.

Step 8 Enter your LEAP password in the Password field.

Step 9 Re-enter the password in the Verify Password field.

Step 10 Click OK to return to the ACU main screen. The following parameters in the Network Security screen

are changed automatically:

• The Server Based Authentication parameter is set to LEAP enabled.

• The access point Authentication parameter is set to Open Authentication.

• The Enable WEP parameter is set to enabled if the LEAP access point uses WEP.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 141 142

Sin comentarios

Cisco Cisco Aironet Wireless LAN Client Especificaciones Pagina 61