Cisco Cisco Aironet Wireless LAN Client Especificaciones descargar pdf (Pagina 86)

6-4

Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Linux

OL-1376-02

Chapter 6 Diagnostics

Overview

WEP (Wired Equivalent Privacy) Shows your client adapter’s WEP status.

Value: Enabled, Not Enabled, or Need Firmware Upgrade

Note See the Enable WEP parameter in “Enabling WEP”

section on page 4-5 for instructions on enabling WEP.

Authentication Type Shows whether the client adapter must share the same WEP keys

as the access point in order to associate or can associate with the

access point regardless of WEP settings. If the client can

associate, it passes data if it and the access point are using shared

key authentication. However, if a client and access point are using

WEP, and the access point is using open authentication, the WEP

keys do not have to match for the client to associate. But when the

client has associated with the WEP key mismatch, it will be

unable to send data to or receive data from the access point.

Value: Open or Shared Key

Note See the Access Point Authentication parameter in

Table 5-2 on page 5-5 for information on setting the

authentication type.

Antenna Selection The antenna mode that your client adapter is using.

Value: Diversity, Right Only, Left Only

(Right Only is the only option for PCI client adapters)

Note See the Antenna Mode (Receive) and Antenna Mode

(Transmit) parameters in Table 5-6 on page 5-17 and

Table 5-7 on page 5-19 for information on setting the

antenna mode.

Channel Set The regulatory domain for which your client adapter is

configured, such as North America. (For the Japan channel set,

the Call ID is also displayed.) This value is not user-selectable.

Note Refer to Appendix A for a list of channel identifiers,

channel center frequencies, and regulatory domains for

each channel.

Client Name The name your client adapter uses when it associates to an access

point.

Note Client Name is an optional setting; the adapter performs

with or without a configured client name.

Note See the Client Name parameter in Table 6-2 for

information on setting the client name.

MAC Address (Factory) The MAC address assigned to your client adapter at the factory.

Current Link Speed The rate at which your client adapter is transmitting data packets.

Value: 1, 2, 5.5, or 11 Mbps

Table 6-2 Client Adapter Status (continued)

Client Adapter Setting Description

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 141 142

Comentarios a estos manuales

Sin comentarios

Cisco Cisco Aironet Wireless LAN Client Especificaciones Pagina 86

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco Cisco Aironet Wireless LAN Client