Cisco Cisco Aironet Wireless LAN Client Especificaciones descargar pdf (Pagina 78)

5-16

Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Linux

OL-1376-02

Chapter 5 Advanced Configuration

Overview

Specifying a Home Network Configuration

After you have set the parameters to prepare your client adapter for use in a home network, you must

specify a home network configuration. To do so, follow these instructions.

Step 1 Select Edit Properties from the Commands pull-down menu, and click the System Parameters tab. The

System Parameters screen appears (see Figure 5-1).

Step 2 Select Use Home Network Configuration under Current Profile or Default Profile.

Step 3 Click OK to save this setting.

Setting Advanced Infrastructure Parameters

Note You can set advanced infrastructure parameters only if your client adapter is set to operate in an

infrastructure network. See the Network Type parameter in Table 5-2.

The Advanced Infrastructure screen (see Figure 5-5) enables you to set parameters that control how the

client adapter operates within an infrastructure network. To access this screen, select Edit Properties

from the Commands pull-down menu, and click the Advanced Infrastructure tab.

Figure 5-5 Advanced Infrastructure Parameters Screen

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 141 142

Sin comentarios

Cisco Cisco Aironet Wireless LAN Client Especificaciones Pagina 78