Cisco MC3810-V - Concentrator - External Guía de instalación descargar pdf (Pagina 13)

11

Install Chassis and Connect Cables (continued)

BRI voice ports

(CB-1D)

Cisco MC3810

8-conductor cables

B2

B1

ALM

B2

B1

ALM

ALM

B2

B1

ALM

B2

B1

BRI 1

BVM

BRI 2

BRI 3

BRI 4

T1/E1

T1/E1

PBX (PINX)

ConnectingBRIS/TVoicePorts

If your Cisco MC3810 has BRI S/T voice ports,

connect them to a Private Integrated Services

Network Exchange (PINX).

TheBRI voice portsare wired as terminalequipment

(TE).

• If the PINX ports are wired as network

termination (NT), use 8-conductor

straight-through cables (not included).

• If the PINX ports are wired as TE, use

8-conductor rollover cables (not included).

Note: The BRI voice ports are physically wired as

TE. However, they can be software-conﬁgured to

function as either TE or NT.

Step 1 Connect one end of each cable to the

appropriateBRI S/T voiceporton the BRI

voice module (BVM). Ports are labeled

BRI 1 through BRI 4 on an orange

background.

Step 2 Connect the otherend ofeach cable to the

appropriate port on the PINX.

Note: BRI ports on the Cisco MC3810 do not

require external power from the PINX when in TE

mode and do not supply power to external devices

when in NT mode.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Comentarios a estos manuales

Sin comentarios