Cisco MC3810-V - Concentrator - External Guía de instalación descargar pdf (Pagina 15)

Install Chassis and Connect Cables (continued)

Console port

(RJ-45)

RJ-45-to-RJ-45

rollover cable

PC (laptop)

RJ-45-to-DB-9 or

RJ-45-to-DB-25 adapter

(labeled TERMINAL)

Cisco MC3810

E&M

FXO

E&M

T1/E1

Connecting the Console Port

Note: If you are going to conﬁgure remotely, skip

this procedure and go to the next page.

If you are using a local PC or ASCII terminal to

conﬁgure your Cisco MC3810, connect it to the

console port.

Use the light-blue RJ-45-to-RJ-45 rollover cable

(included) and a terminal adapter (included):

• RJ-45-to-DB-9 terminal adapter for a PC

• RJ-45-to-DB-25 terminal adapter for a terminal

Step 1 Connect the appropriate adapter labeled

TERMINAL to the communication port

(usually labeled COM) on your PC or

terminal.

Step 2 Connect one end of the cable to the

terminal adapter.

Step 3 Connect the other end to the console port

(light blue) on the Cisco MC3810.

When you are ﬁnished, continue to the “Connecting

the Power Cable” section on page 15.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Sin comentarios

Cisco MC3810-V - Concentrator - External Guía de instalación Pagina 15