Cisco MC3810-V - Concentrator - External Guía de instalación Pagina 8

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 32
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 7
6
Install Chassis and Connect Cables (continued)
Cisco MC3810
2
3
5
6
1
4
ISDN wall jack
(U interface)
BRI S/T backup port
(CB-1D)
8-conductor
straight-through
cable
NT1
S/T
U
T1/E1
BRI 0 S/T
ConnectingtheBRIS/TBackup
Port to the Network
If your Cisco MC3810 supports BRI S/T backup,
connect the BRI S/T backup port to the ISDN
network.
Use an 8-conductor straight-through cable (not
included).
Step 1 Connect one end of the cable to the port
labeled BRI 0 S/T on an orange
background.
Step 2 Connect the other end of the cable to the
S/T interface of the NT1.
Step 3 If the NT1 is not already connected to the
ISDN network, connect the U interface of
the NT1 to the ISDN wall jack
(U interface).
Note: Step 3 should only be necessary in locations
wheretheUinterfaceisaccessible to the user, such as
in the United States.
Vista de pagina 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Comentarios a estos manuales

Sin comentarios