Cisco MC3810-V - Concentrator - External Guía de instalación descargar pdf (Pagina 9)

Install Chassis and Connect Cables (continued)

Cisco MC3810

CSU/DSU

Serial 1

port

Serial 0

port

Cisco serial

transition

cables

FXO

E&M

FXO

E&M

T1/E1

Connecting Synchronous

Serial Ports

You can connect the serial 0 port to a Frame Relay

network or to user equipment.

You can connect the serial 1 port to user equipment.

Use one of the Cisco serial transition cables (not

included). Select the cable to match both of the

following parameters:

• Signaling protocol:

— EIA/TIA-232

— EIA/TIA-449

— V.35

— X.21

— EIA-530

• Cisco MC3810 serial port operating mode:

— DTE

— DCE

See the Cisco MC3810 Series Multiservice Access

Concentrators Hardware Installation Guide for

information about selecting these cables.

Note: Both serial ports are dark blue.

Step 1 Connectthe 60-pin connector of theserial

transition cable to the Cisco MC3810

serial port to be used for this interface.

Step 2 Connect the other end of the serial

transition cable to the CSU/DSU,

synchronous modem, or video codec.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Sin comentarios

Cisco MC3810-V - Concentrator - External Guía de instalación Pagina 9