Cisco NM-16ESW - EtherSwitch Switch Manual de usuario descargar pdf (Pagina 28)

Configuring the Cisco Gigabit EtherSwitch EHWIC

How to Configure Gigabit EtherSwitch EHWICs

Configuring the Cisco Gigabit EtherSwitch EHWIC

OL-23155-01

DETAILED STEPS

Resetting the 802.1x Configuration to the Default Values

You can reset the 802.1x configuration to the default values with a single command.

Beginning in privileged EXEC mode, follow these steps to reset the 802.1x configuration to the default

values.

SUMMARY STEPS

1. configure terminal

2. dot1x default

3. end

4. show dot1x

Command Purpose

Step 1

configure terminal

Example:

Router#configure terminal

Enters global configuration mode.

Step 2

interface gigabitethernet 0/slot/port

Example:

Router(config)#interface

gigabitethernet 0/1/2

Enters interface configuration mode, and specify the interface to which

multiple hosts are indirectly attached.

Step 3

dot1x multiple-hosts

Example:

Router(config-if)#dot1x

multiple-hosts

Allows multiple hosts (clients) on an 802.1x-authorized port.

Make sure that the dot1x port-control interface configuration command

is set to auto for the specified interface.

Step 4

end

Example:

Router(config-if)#end

Returns to privileged EXEC mode.

Step 5

show dot1x interface type 0/slot/por

Example:

Router#show dot1x interface type

0/1/2

Verifies your entries.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 89 90

Comentarios a estos manuales

Sin comentarios

Cisco NM-16ESW - EtherSwitch Switch Manual de usuario Pagina 28

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco NM-16ESW - EtherSwitch Switch