Cisco SCE 2000 4/8xFE Manual de usuario descargar pdf (Pagina 10)

RELEASE SCOS 2.5.8

Release Notes for Cisco Service Control Operating System (SCOS) 2.5.10

OL-7085-08

A telnet session that was established and closed without any login attempt might have caused a

memory overrun.

This bug is fixed in SCOS 2.5.8.

Subscribers synchronization between cascaded SCE platforms has a deficit

• Cisco Number CSCsc82090

In case of very high spawning rate of anonymous subscribers, a deficit could be created

between the active and standby SCE platforms. This deficit will be closed if the standby

becomes the active SCE platform, with the penalty of potential loss of state.

The issue is only relevant for Pull Subscriber Mode.

This bug is fixed in SCOS 2.5.8.

Telnet session might get stuck when Changing IP and Default Gateway

• Cisco Number CSCsb51681

In certain situations, configuration of the default gateway caused the telnet session to get stuck

and prevented further work with the SCE platform until the SCE platform was rebooted.

A workaround was implemented in SCOS 2.5.8.

Issues with Connectivity to the SCE Platform in case Name-Server Configured

• Cisco Number CSCsb51681

If name-server was not configured correctly, ping didn’t work.

This bug is fixed in SCOS 2.5.8.

'setup' CLI Command - the SCE Platform Halts when Configuration is Saved

• Cisco Number CSCsb90338

The SCE platform rebooted when the configuration was saved via the CLI setup command.

This bug is fixed in SCOS 2.5.8.

Hardware Bypass Module Fixes for the SCE2000-4/8xFE

• Cisco Number n/a

Problems were encountered on the NICs of the SCE2000-4/8xFE that could cause an additional

reboot on system startup.

This bug is fixed in SCOS 2.5.8.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Sin comentarios

Cisco SCE 2000 4/8xFE Manual de usuario Pagina 10