Cisco SCE 2000 4/8xFE Manual de usuario descargar pdf (Pagina 23)

Open Caveats

Release Notes for Cisco Service Control Operating System (SCOS) 2.5.10

OL-7085-08

Open Caveats

Link flickering using link reflection with linecard aware mode

• Cisco Number CSCse16643

When an SCE platform is connected to 7600 on each link, as in a MGSCP topology, and

link reflection is used with line card aware mode, during the recovery process on one link a

flickering may be experienced on the other link, although in linecard aware mode the first

link should have no effect on the second one.

SNMP - chassis type returns incorrect value

• Cisco Number CSCsc91840

The SEMib does not return the correct value indicating the type of chassis. In addition, the

possible types defined do not reflect the current naming conventions of the existing chassis

types.

Unsupported Counter on the SNMP Management Interface MIB

• CSCsc43972

The ifInOctets and ifOutOctets MIB object for the management interfaces of the SCE

platform are not supported and always return 0.

This is fixed in SCOS 3.0.0.

FF L4 Rules Don't Match Non-First IP Fragments

• Cisco Number 3975

A non-first fragment packet doesn’t include any L4 information. This implies that when

setting Flow Filter rules using L4 attributes (such as port number and TCP flags) they will

not work for Non-First-Fragment packets.

Workaround: When using counters or other rules for L4 information, this phenomenon

should be taken into account.

Changing SCEs IP Requires Manual Reboot

• Cisco Number 4989

The system does not automatically reboot when the IP address is changed.

Workaround: After changing the IP address on an SCE using CLI, manually reboot the

SCE.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Sin comentarios

Cisco SCE 2000 4/8xFE Manual de usuario Pagina 23