Cisco WS-X6248-RJ-45 - Catalyst 6000 Expansion Module Manual de usuario Pagina 11

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 42
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 10
Cisco Systems, Inc.
All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 11 of 42
Determining the Current Operating System on a Cisco Catalyst 6500
The Cisco IOS command line for both the Cisco IOS portion of hybrid and Cisco IOS systems look identical. To
determine what operating system is running on the switch, you can use the show version command from the Cisco
IOS command line. To access the IOS (Layer 3) functionality in hybrid OS, enter session 15 or switch console from
the command line. The console is then turned over to the MSFC, and this is where both Cisco IOS and hybrid OS
systems look identical.
Additionally, you can determine the OS on the chassis by viewing the interfaces. For example, using show ip interface
brief command on the hybrid OS shows VLANs. The same command on Cisco IOS Software displays physical
interfaces (for example, gigabitethernet 1/1) as well as VLANs interfaces.
Cisco IOS and Hybrid OS Boot Process
The boot process in both the Cisco IOS and the hybrid operating system models is automatic and transparent to the
user. In the hybrid model, the boot processes are separate for both the switch and the route processors as they each
boot independent operating systems.
In Cisco IOS Software, the two processors (the SP and RP) each load the Cisco IOS Software. Two processors
working together yield two ROMMONs and two bootflash devices. First, the SP boots to ROMMON and loads its
portion of the Cisco IOS Software. When the SP is booted, the software control is passed to the RP so that the second
processorcansuccessfullyboot.From a console perspective, the RJ-45 console port on theSupervisorEngineinitially
shows information from the SP. During the boot cycle for the Cisco Catalyst 6500 with the Cisco IOS Software,
control is passed to RP CPU as shown in the following statement on the console:
From a Hybrid System
Router#show version
Cisco Internetwork Operating System Software
IOS (tm) MSFC2 Software (C6MSFC2-PSV-M), Version 12.1(11b)E4, EARLY DEPLOYMENT R
ELEASE SOFTWARE (fc1)
From a Cisco IOS System
Router#show version
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-PSV-M), Version 12.1(11b)EX1, EARLY DEPL
YMENT RELEASE SOFTWARE (fc1)
Vista de pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 41 42

Comentarios a estos manuales

Sin comentarios