Cisco WS-X6248-RJ-45 - Catalyst 6000 Expansion Module Manual de usuario descargar pdf (Pagina 8)

Cisco Systems, Inc.

Page 8 of 42

As Table 2 shows, the majority of line cards are supported in both CatOS and Cisco IOS Software. For speciﬁc

software information on each line card, refer to the release notes at:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/index.htm.

Memory Requirements

The default memory requirements are the same for both the Cisco IOS Software and the CatOS software. The

Supervisor Engine 1a ships with a default of 128 MB DRAM and 16 MB bootﬂash. The Supervisor Engine 2 ships

with a default of 128 MB DRAM (upgradable to 512 MB) and 32 MB bootﬂash. The MSFC2 ships with 128 MB

DRAM and can be upgraded to 512 MB. The WS-X6K-S2U-MSFC2 is an orderable part number for 256 MB of

DRAM on the Supervisor Engine 2 as well as 256 MB DRAM on the MSFC2.

Because the Cisco IOS Software images are combined Layer 2 and 3 images, they are larger than CatOS images.

Today’s Cisco IOS images are greater than 20 MB in some cases. For customer’s who want to store more than one

CiscoIOS Software image forasystem, the MEM-C6K-ATA-1-64M ﬂash card, whichallowsup to 64MBofstorage,

is available.

For routing table capacity, the Cisco IOS Software has speciﬁc memory guidelines, which are documented in the

release notes. Refer to the Cisco Catalyst 6500 Series release notes for these recommendations.

WS-SVC-NAM-1 x

WS-SVC-NAM-2 x

Miscellaneous Modules

WS-X6101-OC12-SMF/MMF x

WS-X6302-MSM x

WAN Modules

WS-X6182-2PA xx

OSM-4GE-WAN-GBIC xx

OSM-2OC12-POS-MM/SI/SL xx

OSM-4OC12-POS-MM/SI/SL xx

OSM-4OC3-POS-SI xx

OSM-8OC3-POS-MM/SI/SL xx

OSM-16OC3-POS-MM/SI/SL xx

OSM-1OC48-POS-SS/SI/SL xx

OSM-1CHOC48/T3-SS/SI x

OSM-4CHOC12/T3-MM/SI x

OSM-2OC12-ATM-MM/SI x

Table 2 Hardware Modules

Chassis and Supervisors CatOS Cisco IOS

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 41 42

Sin comentarios

Cisco WS-X6248-RJ-45 - Catalyst 6000 Expansion Module Manual de usuario Pagina 8