Cisco Ex SERIES Manual de usuario descargar pdf (Pagina 62)

Juniper Networks/Cisco Systems Switch Interoperability Cookbook

! ! !

admin@VCF# set protocols mstp msti vlan v2002

admin@VCF# commit

On the Juniper EX4300:

admin@VCF# delete protocols rstp

admin@VCF# set protocols mstp interface xe-0/2/0.0

admin@VCF# set protocols mstp interface ge-0/0/12.0

admin@VCF# set protocols mstp msti vlan v2001

admin@VCF# set protocols mstp msti vlan v2002

admin@VCF# commit

Cisco!commands!

1. Create VLANs 2001 and 2002:

Nexus7010# configure terminal

Nexus7010(config)# vlan 2001-2002

Nexus7010(config-vlan)# exit

2. Configure ports Ethernet3/13 and Ethernet3/14 as access-mode ports for VLANs 2001

and 2002, respectively:

Nexus7010(config)# interface Ethernet3/13

Nexus7010(config-if)# description MSTP to Spirent vlan 2001

Nexus7010(config-if)# switchport

Nexus7010(config-if)# switchport access vlan 2001

Nexus7010(config-if)# no shutdown

Nexus7010(config)# interface Ethernet3/14

Nexus7010(config-if)# description MSTP to Spirent vlan 2002

Nexus7010(config-if)# switchport

Nexus7010(config-if)# switchport access vlan 2002

Nexus7010(config-if)# no shutdown

Note that Cisco Nexus 7000 switches require the explicit “no shutdown” command to

enable interfaces. This command is not required in Cisco Catalyst switches.

3. Configure ports Ethernet3/1 and Ethernet3/3 as trunk ports that allow tagged traffic for

VLANs 2001 and 2002:

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 82 83

Sin comentarios

Cisco Ex SERIES Manual de usuario Pagina 62