Cisco Ex SERIES Manual de usuario descargar pdf (Pagina 80)

Juniper Networks/Cisco Systems Switch Interoperability Cookbook

! ! !

admin@ex4300# set interfaces xe-0/2/0 description "trunk to EX9208 xe-

5/2/1"

admin@ex4300# set interfaces xe-0/2/0 unit 0 family ethernet-switching

interface-mode trunk

admin@ex4300# set interfaces xe-0/2/0 unit 0 family ethernet-switching vlan

members all

This example uses the Junos keyword all to permit all VLAN traffic across the trunk. If

desired, forwarding can be restricted to specific VLANs. For example, this command

would permit traffic only from the default VLAN:

admin@ex4300# set interfaces xe-0/2/0 unit 0 family ethernet-switching vlan

members default

4. Configure two interfaces to allow traffic from the Cisco APs, both as access-mode

members of the default VLAN:

admin@ex4300# set interfaces ge-0/0/12 description "to Cisco AP 3602"

admin@ex4300# set interfaces ge-0/0/12 unit 0 family ethernet-switching

interface-mode access

admin@ex4300# set interfaces ge-0/0/12 unit 0 family ethernet-switching

vlan members default

admin@ex4300# set interfaces ge-0/0/13 description "to Cisco AP3702"

admin@ex4300# set interfaces ge-0/0/13 unit 0 family ethernet-switching

interface-mode access

admin@ex4300# set interfaces ge-0/0/13 unit 0 family ethernet-switching

vlan members default

5. Enable PoE+ on the interfaces to which the Cisco APs are attached:

admin@ex4300# set poe interface ge-0/0/12

admin@ex4300# set poe interface ge-0/0/13

admin@ex4300# commit

If desired, PoE+ can be enabled on all interfaces using Junos’ all keyword:

admin@ex4300# set poe interface all

admin@ex4300# commit

Cisco!commands!

Configuration of the Cisco Wi-Fi controllers involves numerous RF as well as data

networking parameters, and is beyond the scope of this document. For more information,

consult the Cisco Wireless LAN Configuration Guide.

Validation!

On the Cisco Wi-Fi controller attached to the Juniper EX9208, the command “show ap

summary” will display a list of all APs managed by the controller.

1 2 ... 75 76 77 78 79 80 81 82 83

Sin comentarios

Cisco Ex SERIES Manual de usuario Pagina 80