Cisco WS-C1924-EN-DC - 100Mbps Ethernet Switch Manual de usuario descargar pdf (Pagina 13)

Overview 1-13

Console Port

To conﬁgure and manage the switch through the menu-based management and diagnostic

consoles and the command-line interface (CLI), you can connect the console port to a

management station or modem with the supplied RJ-45-to-RJ-45 rollover console cable

and an appropriate adapter. For additional information, see the “Connecting to the Console

Port” section on page 2-16.

Switched AUI Port

You can connect the switched AUI port to an Ethernet transceiver, which is then connected

to a 10-Mbps Ethernet device through the following cable types:

• 10Base5—Thick coaxial cable connects the switch to another device up to a distance of

500 meters. This cable type uses F connectors.

• 10Base2—Thin coaxial cable connects the switch to another device up to a distance of

185 meters. This cable type uses T-type BNC connectors.

• 10BaseFL—Single- or multimode ﬁber-optic cable connects the switch to another

device up to a distance of 2 kilometers. This cable type uses S T or Bayonet connectors.

• 10BaseT—Unshielded twisted-pair cable connects the switch to another device over a

distance of 100 meters. This cable type uses standard RJ-45 connectors.

For connection information, see the “Connecting to the Switched AUI Port” section on

page 2-32.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 37 38

Sin comentarios

Cisco WS-C1924-EN-DC - 100Mbps Ethernet Switch Manual de usuario Pagina 13