Cisco WS-C1924-EN-DC - 100Mbps Ethernet Switch Manual de usuario Pagina 3

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 38
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 2
Overview 1-3
Features
(LANE) trunk connections; ATM permanent virtual connections (PVCs); Fast
EtherChannel connections; and TACACS+ authentication), refer to the Catalyst 1900
Series and Catalyst 2820 Series Enterprise Edition Software Configuration Guide.
Table 1-1 Standard Software Features
Feature Description
Performance
and
Configuration
Half- and full-duplex operation on all 10- and 100-Mbps ports.
Autonegotiation of duplex operation on 100BaseTX ports.
IEEE 802.3x flow control on 100-Mbps ports operating in full-duplex mode.
Back pressure-based congestion control on half-duplex, 10-Mbps ports
(standard IEEE 802.3 Layer 2 backoff algorithms).
Enhanced Congestion Control (ECC) on all half-duplex ports for accelerated transmissions when
queues are full.
FragmentFree (cut-through) and store-and-forward switching modes for optimal performance and
error checking.
Per-port broadcast storm control for preventing faulty end stations from degrading overall system
performance.
Support allowing ports to belong to up to four separate bridge groups within the switch.
Cisco Group Management Protocol (CGMP) for limiting multicast flooding to predefined ports.
IEEE 802.1d Spanning-Tree Protocol (STP) with Port Fast for network loop detection and
disabling and for fault-tolerant connectivity.
Management
Catalyst 1900 Switch Manager for in-band management access through a web browser.
Menu-based management console for in-band management access through Telnet sessions
and out-of-band management access through direct serial connection to the switch console port.
Menu-based diagnostic console for switch recovery tasks.
Cluster membership support for configuration and monitoring from a Catalyst 2900 series XL or
Catalyst 3500 series XL command switch.
Cisco Discovery Protocol (CDP) versions 1 and 2 for network topology discovery and mapping
between the switch and other Cisco devices on the network.
Simple Network Management Protocol (SNMP) and four groups of embedded remote monitoring
(RMON) agents for complete configuration, management, and monitoring on a per-port basis.
Switch Port Analyzer (SPAN) for complete traffic monitoring.
Encrypted (secret) password support for extra switch security.
Vista de pagina 2
1 2 3 4 5 6 7 8 ... 37 38

Comentarios a estos manuales

Sin comentarios