Cisco WS-C1924-EN-DC - 100Mbps Ethernet Switch Manual de usuario descargar pdf (Pagina 14)

Management Options

Catalyst 1900 Series Installation and Configuration Guide

1-14

Management Options

You can use the default settings shipped with the Catalyst 1900 switch, or you can

customize the switch conﬁguration through the management options described in this

section. The Catalyst 1900 Switch Manager is the easiest interface to use for basic

conﬁguration and monitoring tasks. To perform all the conﬁguration and monitoring tasks,

use the management console, the SNMP, or the command-line interface (CLI).

If your switch is or will be part of a switch cluster, you can also conﬁgure and monitor it

from the Cluster Management applications of a cluster command switch.

Access to the management console or CLI requires a direct connection to the switch

console port or a Telnet session. Access to the Catalyst 1900 Switch Manager, Cluster

Management applications, or SNMP requires a connection to one of the switch network

ports. For more information about accessing the management interfaces, see the “Accessing

the Management Interfaces” section on page 2-34.

This section describes the hardware and software requirements and provides the following

overviews:

• Conﬁguring the switch as an individual switch or as a cluster member

• Catalyst 1900 Switch Manager, including the default settings

• Management console, including the default settings

• CLI

• SNMP

Note The menu-based diagnostic console is described in the “Recovery Procedures Using

the Diagnostic Console” section on page 5-9.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 37 38

Sin comentarios

Cisco WS-C1924-EN-DC - 100Mbps Ethernet Switch Manual de usuario Pagina 14