Cisco WS-C1924-EN-DC - 100Mbps Ethernet Switch Manual de usuario Pagina 8

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 38
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 7
Front-Panel Description
Catalyst 1900 Series Installation and Configuration Guide
1-8
Port LEDs and Modes
Each port has an LED above it. These LEDs, as a group or individually, display information
about the switch and about individual ports (Table 1-4).
Changing Between Modes
Pressing the Mode button on the front panel changes the mode of the port LEDs. The STAT,
UTL, and FDUP LEDs show which mode is active (Table 1-5). The selected mode remains
on approximately for 30 seconds before returning to the default mode (port status). You can
change the default mode from the Console Settings Menu.
Table 1-4 Port LED Modes Summary
Mode LED Determines...
Port status (default) STAT Status of individual ports
Bandwidth utilization UTL Percentage of the switch total bandwidth being used at any
one time
Full-duplex operation FDUP Which ports are operating in half- or full-duplex mode
Table 1-5 Changing Between Modes
For this Mode... Push the Mode Button Until...
Port status Only the STAT LED is on.
Bandwidth utilization Only the UTL LED is on.
Full-duplex operation Only the FDUP LED is on.
Vista de pagina 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 37 38

Comentarios a estos manuales

Sin comentarios