Cisco AIR-WLC2006-K9 - Wireless LAN Controller 2006 Guía de usuario descargar pdf (Pagina 37)

1-13

Cisco Wireless LAN Solution Product Guide

OL-7955-01

Chapter 1 Overview

Cisco WLAN Solution Wired Connections

Figure 1-4 Typical Mobility Group Name Application

Note Cisco recommends that you assign one set of VLANs for wireless LANs and a different set of VLANs

for Management Interfaces to ensure that controllers properly route VLAN traffic.

The Cisco WLAN Solution Mobility Group feature can also be used to limit roaming between different

floors, buildings, or campuses in the same enterprise by assigning different Mobility Group names to

different Cisco Wireless LAN Controllers within the same wireless network.

If enabled, Radio Resource Management (RRM) operation is constrained within each Cisco WLAN

Solution Mobility Group. See the “Radio Resource Management (RRM)” section on page 1-7 for more

information on RRM.

Note Because controllers communicate with each other when they are in the same mobility group, Cisco

recommends that operators do not add physically separated controllers to the same static mobility group

to avoid unnecessary traffic on the network.

Cisco WLAN Solution Wired Connections

The Cisco Wireless LAN Solution components communicate with each other using industry-standard

Ethernet cables and connectors. The following paragraphs contain details of the Cisco WLAN Solution

wired connections.

• The Cisco 2000 Series Wireless LAN Controller connects to the network using from one to four

10/100BASE-T Ethernet cables.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 259 260

Sin comentarios

Cisco AIR-WLC2006-K9 - Wireless LAN Controller 2006 Guía de usuario Pagina 37