Cisco WS-X6708-10G-3CXL= - 10 Gigabit Ethernet Module Manual de usuario descargar pdf (Pagina 23)

White Paper

When the two switches are brought online, they proceed with VSL initialization and initialize their respective VSL

ports. The two switches communicate with each other and determine active and standby roles. This exchange of

information is evident through the following console messages:

VSS#sh run | begin switch virtual domain

switch virtual domain 100

switch mode virtual

When the two switches are brought online, they proceed with VSL initialization and initialize their respective VSL

ports. The two switches communicate with each other and determine active and standby roles. This exchange of

information is evident through the following console messages:

System detected Virtual Switch

configuration...

Interface TenGigabitEthernet 1/5/4 is

member of PortChannel 1

Interface TenGigabitEthernet 1/5/5 is

member of PortChannel 1

<snip>

00:00:26: %VSL_BRINGUP-6-MODULE_UP: VSL

module in slot 5 switch 1 brought up

Initializing as Virtual Switch active

System detected Virtual Switch

configuration...

Interface TenGigabitEthernet 2/5/4 is

member of PortChannel 2

Interface TenGigabitEthernet 2/5/5 is

member of PortChannel 2

<snip>

00:00:26: %VSL_BRINGUP-6-MODULE_UP: VSL

module in slot 5 switch 2 brought up

Initializing as Virtual Switch standby

After the VSL is initialized and the Cisco Virtual Switching System becomes active, you may notice that the console is

active only for the active virtual switch and has been disabled for the standby virtual switch:

00:08:01: SW1_SP: Card inserted in

Switch_number = 2 ,

physical slot 3, interfaces are now online

VSS >

VSS>en

VSS#

00:01:43: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP

is OFF

00:01:43: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP

is OFF

VSS-sdby>

Standby console disabled

Although not required, it is possible to verify that all modules have been automatically provisioned and their module

types stored in the configuration by issuing the following command on the active virtual switch:

VSS#sh run | begin module provision

module provision switch 1

slot 1 slot-type 254 port-type 31 number 2 port-type 61 number 1 port-type 60 number 2

virtual-slot 17

slot 2 slot-type 148 port-type 60 number 4 virtual-slot 18

slot 3 slot-type 147 port-type 61 number 48 virtual-slot 19

module provision switch 2

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 61 62

Comentarios a estos manuales

Sin comentarios

Cisco WS-X6708-10G-3CXL= - 10 Gigabit Ethernet Module Manual de usuario Pagina 23

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco WS-X6708-10G-3CXL= - 10 Gigabit Ethernet Module