Cisco MC3810 Guía de instalación Pagina 32

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 78
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 31
Configuring the H.323 Gateway
32
Release 12.0(7)XK
! Configure the serial interface
interface serial 0/0
clock rate 2000000
ip address 172.16.1.123
no shutdown
Configuration for Router SLC
! Configure pots dial peer 1
dial-peer voice 1 pots
destination-pattern 9...........
port 1/0/0
! Configure voip dial peer 2
dial-peer voice 2 voip
destination-pattern +14085554000
session target ipv4:172.16.1.123
! Configure serial interface
interface serial 0/0
ip address 172.16.65.182
no shutdown
PSTN Gateway Access Using FXO Connection (PLAR Mode)
The following example shows how to configure Voice over IP to link users with the PSTN gateway
using an FXO connection (PLAR mode).
In this example, PSTN users in Salt Lake City, Utah, can dial a local number and establish a private
line connection in a remote location. As in the previous example, Router SLC in Salt Lake City is
connected directly to the PSTN through an FXO interface.
Figure 4 illustrates the topology of this connection example.
Figure 4 PSTN Gateway Access Using FXO Connection (PLAR Mode)
Note This example assumes that the company already has established a working IP connection
between its two remote offices.
S6618
1(408) 555-4000
Router SJ
San Jose Salt Lake City
Router SLC
172.16.1.123 172.16.65.182
PSTN user
Voice port
1/0/0
IP cloud
PLAR connection
Voice port
1/0/0
PSTN
cloud
Vista de pagina 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 77 78

Comentarios a estos manuales

Sin comentarios