Cisco MC3810 Guía de instalación descargar pdf (Pagina 57)

incoming called-number

Configuring Voice over IP for Cisco MC3810 Series Concentrators 57

incoming called-number

To identify the service type for a call on a router handling both voice and modem calls, use the

incoming called-number dial peer conﬁguration command. To return to the default value, use the

no form of this command.

incoming called-number string

no incoming called-number string

Syntax Description

Default

The default value for this command is no associated called number.

Command Mode

Dial peer conﬁguration

Command History

Usage Guidelines

When the Cisco MC3810 is handling both modem and voice calls, it needs to be able to identify the

service type of the call—meaning whether the incoming call to the server is a modem or a voice call.

When the access server handles only modem calls, theservice type identiﬁcation is handled through

modem pools. Modem pools associate calls with modem resources based on the called number

(DNIS). In a mixed environment, where the server receives both modem and voice calls, you need

to identify the service type of a call by using the incoming called-number command.

If you do not use the incomingcalled-number command, the server attempts to resolve whether an

incoming call is a modem or voice call based on the interface over which the call comes. If the call

comes in over an interface associated with a modem pool, the call is assumed to be a modem call; if

a call comes in over a voice port associated with a dial peer, the call is assumed to be a voice call.

By default, there is no called number associated with the dial peer, which means that incoming calls

will be associated with dial peers based on matching calling number with answer address, call

number with destination pattern, or calling interface with conﬁgured interface.

This command applies to both VoIP and POTS dial peers.

string Speciﬁes the destination telephone number. Valid entries are any series of digits that

specify the E.164 telephone number.

Release Modiﬁcation

11.3NA This command was introduced on the Cisco AS5800 platform.

12.0(7)XK This command was ﬁrst supported on the Cisco MC3810 platform.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 77 78

Sin comentarios

Cisco MC3810 Guía de instalación Pagina 57