Cisco WS-C3550-24-FX-SMI - Catalyst 3550 100BASE-FX Switch Guía de instalación descargar pdf (Pagina 87)

2-41

Catalyst 3550 Multilayer Switch Hardware Installation Guide

78-11358-03

Chapter 2 Installing and Starting the Switch

Connecting a PC or Terminal to the Console Port

Follow these steps to connect the PC or terminal to the switch:

Step 1 Configure the baud rate and character format of the PC or terminal to match these

console port default characteristics:

• 9600 baud

• 8 data bits

• 1 stop bit

• No parity

After you have gained access to the switch, you can change the console baud rate

through the Administration > Console Baud Rate menu in the Cluster

Management Suite (CMS).

Step 2 Using the supplied RJ-45-to-DB-9 adapter cable, insert the RJ-45 connector into

the console port, as shown in Figure 2-39 and Figure 2-40.

Step 3 Attach the DB-9 female DTE adapter of the RJ-45-to-DB-9 adapter cable to a PC,

or attach an appropriate adapter to the terminal.

Step 4 Start the terminal-emulation program if you are using a PC or terminal.

Figure 2-39 Connecting to the Catalyst 3550-12T and 3550-12G Console Port

100-240V~

5-3A

50/60Hz

CONSOLE

RJ-45

console

port

74427

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 149 150

Sin comentarios

Cisco WS-C3550-24-FX-SMI - Catalyst 3550 100BASE-FX Switch Guía de instalación Pagina 87